Equipment introduction

Large material into the silo, through the push rod impact into a number of crushing blocks, and then pushed through the cylinder to the crushing chamber. The material is crushed by the friction, shear and extrusion caused by the rotation of the grinding disc and the fixing disc. Breaking through the traditional crushing jaw crushing + roller crushing two-in-one equipment.

Grinding effect: through the adjustment of spacing, to achieve different particle sizes.

Characteristic

Shearing, crushing and grinding of various materials

Stone mortar mill with two disks

The raw material is crushed through the clearance of the mill

It is crushed by the impact force, centrifugal force and shear force of the millstone

The gap is controlled by electronic dials from IMAO, Japan

The clearance can also be adjusted when the machine starts

Crushing part is equipped with cooling jacket, water cooling equipment

Injection of dry air or nitrogen can control the dew point