Equipment introduction：

Cyclone classifier is a classifier that continuously screens the powder raw materials supplied by one end of the screen through the high-speed rotation of the pulp blade installed on the rotating bearing in the inner of the synthetic fiber horizontal cylinder screen with a small hole of 10~1000 microns.

Principle of classification

The raw material supplied from the feed port to the machine is conveyed to the end of the cylinder screen through the cylinder screw feeder, which is dispersed in the inner surface of the cylinder screen by the high-speed rotating blade. The blade has a certain torsion Angle, and the raw material moves towards the exit side while rotating in the cylindrical screen. At this point, material accelerated by the rapidly rotating blades is pushed to the inside of the screen, causing the screen around the blades to produce very small vibrations. This vibration has a high frequency wave number and a great acceleration, in can prevent the screen mesh plugging at the same time, let than the screen mesh tiny particles through the cylindrical screen from the micro powder outlet discharge, coarse particles can not pass through the small screen: hole, and from the outlet end of the cylindrical screen to the coarse powder outlet.